Gasboy FMS KE200 - Manual (Page 70)

Encoding Keys Field Descriptions
Page 64 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
Field Descriptions
Key Type
The Key Type is a one digit numeric field that identifies the type of key being used. Possible
values are:
0 Single Key
1 Employee Key (Dual key)
2 Vehicle Key (Dual key)
3 Supervisor Key
4 Delivery Key
5 Dipstick Key
6 Password Key (FleetKey); Code Key (CFN)
7 Encoding Key (FleetKey only)
Field Separators
In a dual-key system, some fields are encoded on one key, but not on the other. Special
characters called field separators take the place of the corresponding ID field on the other key.
To encode a field with field separators at the KE200 keypad, press CLEAR twice to fill the
field. On the data terminal, use the tilde character (“~”) as a field separator and enter one tilde
for each character in the field.
System ID
The System ID is a four digit numeric field that identifies your system and safeguards against
access by users of other systems. Your unique system ID is assigned at the time of order and
appears on your key layout. When you are using two keys, the system ID is encoded and
verified on both.
Key Number
The Key Number is a five digit numeric field used for lockout on FleetKey systems. When
using two keys, each key has its own unique key number. On a standard system with 10,000
key lockout, key numbers range from 00001-09999. Additional blocks of 10,000 lockouts can
be specified at order time. This field is not used with CFN systems, but should be set up as an
incrementing field.