Gasboy FMS KE200 - Manual (Page 25)

MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007 Page 19
Load Date KE200 Setup - Standalone
Load Date
Use “LOAD DATE” to load the current date. The KE200 should be factory set with the correct
date, but occasionally you may need to change it.
To load date, proceed as follows:
1 Enter the Setup mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE
2 Press ENTER. The system displays the following:
SETUP MENU:
1 2 1 6 9 1
MMDDYY
The currently loaded date appears on the second line of the display.
3 Type the correct date and press ENTER. The display returns to the following:
SETUP MENU:
LOAD
DATE
To display another primary prompt, press F1 or F2 until the desired prompt appears.
To exit back to “SELECT OPTION: SETUP”, press PREV.
Load Time
Use “LOAD TIME” to load the current time in 24-hour format (00:00 to 23:59). The KE200 is
factory set to Eastern time with the correct time, but occasionally you may need to change it.
To load time, proceed as follows:
1 Enter Setup Mode as described previously. The system displays the following:
SETUP MENU:
LOAD
DATE