beautypg.com

Gasboy FMS KE200 User Manual

Page 86

background image

Performing Maintenance

View Maintenance (1000 FleetKey only)

Page 80 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007

1

Turn the Manager key to MAINT. The system prompts:

2

Insert the Fleetkey into the receptacle and turn it to the right.

3

Press F1. The system displays the following:

4

Press ENTER. The system prompts:

5

Enter the maintenance type to be viewed (A, B, or C) and press ENTER. The system displays
the following:

This display shows the maintenance type, and the date and odometer reading at which
maintenance was last performed. The second line shows the number of days and/or miles/
kilometers remaining until the next maintenance is due.

6

Press ENTER. The system returns to “SELECT MAINTENANCE” and you can select
another maintenance type to view.

Note: If you do not wish to view additional maintenance, press PREV. The “MAINTENANCE

MODE: VIEW MAINTENANCE” display reappears.