Gasboy FMS KE200 - Manual (Page 48)

KE200 Setup - Terminal Load Format (LO FO)
Page 42 MDE-4465A KE200 Key Encoder/Maintenance Terminal Operation Manual · October 2007
Load Format (LO FO)
“Load Format” allows you to load predefined formats for each key type. During encoding, you
can use these formats as a template to speed up encoding of your keys. Each format contains
all possible fields (except System ID) that can be on a key. Data for the system ID field is
obtained from the “LOAD SYSTEM” command.
Each format prompt consists of two parts: the field name, and a bracketed list of formatting
choices (specifiers) for that field. The system lists only specifiers that are relevant to that field.
A chart of specifiers and the applicable fields is provided below.
Key Fields
Key Types
0, 4, 5, 6, 7 Key Type 1 Key Type 2 Key Type 3
Key Number 1 V, I, D V, I, D V, I, D V, I, D
Alpha ID Fields 2 V, C V, C, F, S V, C, F, S V, C, S
Numeric ID Fields V, C, I, D V, C, F, I, D, S V, C, F, I, D, S V, C, I, D, S
Exp. Date V, C V, C, F V, C, F V, C
Prod. Limit V, C F V, C V, C
Prod. Auth. V, C F V, C V, C
Price Level V, C V, C, F V, C, F V, C
Check Digit V, C V, C V, C V, C
Prev. Odom. V, C F V, C V, C
Last Odom. V, C F V, C V, C
Reas. Chk Dig. V, C F V, C V, C
Odom. Retries V, C F V, C V, C
Min. Miles V, C F V, C V, C
Max. Miles V, C F V, C V, C
Veh. Class V, C F V, C V, C
Maint A Odom. V, C F V, C V, C
Maint A Date V, C F V, C V, C
Maint B Odom. V, C F V, C V, C
Maint B Date V, C F V, C V, C
Maint C Odom. V, C F V, C V, C
Maint C Date V, C F V, C V, C
PIN V, C, I, D V, C, I, D V, C, I, D V, C, I, D
V =Variable, field will be entered during encoding.
C =Constant, value is entered into format and used in all formatted encodes.
I =Incrementing, value is entered into format and increased by one for each key encoded.
D =Decrementing, value is entered into format and decreased by one for each key encoded.
F =Field separator, field defined on another key type (Key types 1 & 2 only).
S =Supervisor, field is a supervisor entry (Key types 1, 2, and 3 only).
1 = The Key Number field is not used by the CFN system, but it needs to be encoded. Set it up
as an incrementing field.
2 = The CFN system does not support alphanumeric ID fields.