Comtech EF Data SDM-300A - Manual (Page 408)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–16
Bulk Drop
Channels
Assignment Command:
Response:
Status:
Response: >add/BDCA_dd;cc_dd;cc_dd;cc_dd;cc......'cr''lf']
>add/BDCA_dd;cc_dd;cc_dd;cc_dd;cc......'cr''lf'] Where:
dd = 1 to N (over the satellite drop channel);
where N = (modulator data rate) divided by
(64 kbps).
cc = 1 to 24 (terrestrial channel number for T1
data formats).
cc = 1 to 31 (terrestrial time slot number for E1
data formats).
Notes:
1. The status response returns
programming information for 1 to N
drop channels.
2. This command is not valid when the
drop data format is specified as E1CAS
and the modulator data rate is set to
1920.0 kbps.
Insert Channels
Assignment Command:
Response:
Status:
Response: >add/ICA_ii;cc'cr''lf']
>add/ICA_ii;cc'cr''lf']
Where:
ii = 1 to N (over the satellite insert channel);
where N = (demodulator data rate) divided by
(64 kbps).
cc = 1 to 24 (terrestrial channel number for T1
data formats).
cc = 1 to 31 (terrestrial time slot number for E1
data formats).
cc = 0 if no insert is desired for the specified
insert channel.
Notes:
1. Time slot 16 (cc = 16) may not be
specified when the insert data format is
specified to be E1CAS.
2. This command is not valid when the
insert data format is specified as
E1CAS and the demodulator data rate
is set to 1920.0 kbps.