Comtech EF Data SDM-300A - Manual (Page 202)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–108
FUNCTION SELECT: UTILITY: MODEM TYPE:CONFIGURATION
CODE – CARD #2 (CONDITIONAL)
IMPORTANT
Applies only if Card #2 is installed.
CONFIGURATION
CODE – CARD #2
Comtech EF Data-supplied code. Press
1)AAAAAAAAAA
2)AAAAAAAAAA
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
← ] or [ → ] to move the flashing cursor. Press [ ↑ ] or [ ↓ ] to increase or decrease
the digit at the flashing cursor. Press [ENTER] to execute the change.
Entering this code enables the corresponding modem option. To purchase an option, contact an
Comtech EF Data marketing representative for more information
FUNCTION SELECT: UTILITY: MODEM TYPE:
CONFIGURATION CODE – CARD #3 (CONDITIONAL)
IMPORTANT
Applies only if Card #3 is installed.
CONFIGURATION
CODE – CARD #3
Comtech EF Data-supplied code. Press
1)AAAAAAAAAA
2)AAAAAAAAAA
On entry, the current configuration code is displayed with the flashing cursor on the first
character. Press [
← ] or [ → ] to move the flashing cursor. Press [ ↑ ] or [ ↓ ] to increase or decrease
the digit at the flashing cursor. Press [ENTER] to execute the change.