Comtech EF Data SDM-300A - Manual (Page 138)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–44
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
MAXIMUM POWER (CONDITIONAL)
MAXIMUM POWER
-5.0 dBm
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Programs the AUPC Maximum Power Level Range: -5 to –30 dBm, in 0.5 dBm steps
Programs the maximum power level of the AUPC. Upon entry, the current maximum power
value is displayed. Press [
↑] or [↓] to increase or decrease the digit at the flashing cursor. Press
[ENTER] to execute the change.
FUNCTION SELECT: CONFIGURATION: LOCAL AUPC:
TARGET Eb/No (CONDITIONAL)
TARGET EB/NO
6.0 dB
IMPORTANT
Conditional: This menu is displayed when Local Modem AUPC = ON
located under the Utility: Modem Type menu.
Manufacturer does not recommend a setting greater than 15.5 dB.
Programs E
b
/N
0
Target Set Point Range: 3.2 to 16.0 dB, in 0.1 dB steps
Programs the E
b
/N
0
target set point. Upon entry, the current value is displayed. Press [ ↑] or [↓]
to increase or decrease the digit at the flashing cursor. Press [ENTER] to execute the change.