Comtech EF Data SDM-300A - Manual (Page 153)

SDM-300A Satellite Modem Revision 6
Front Panel Operation MN/SDM300A.IOM
5–59
FUNCTION SELECT MONITOR:FRAME ERRORS (CONDITIONAL)
FRAME ERRORS
n.n E-e
2047 errors
n.n E-e
IMPORTANT
Conditional:This menu available only when the optional Overhead
card is installed.
Frame Errors Range: < mm.m E-e to > mm.m E-e, or No Data
Displays the current framing pattern bit error rate or “No Data” (if carrier is not locked).
Monitors the currently selected READ_ERROR function.
Notes:
1. Low limit is based on performance.
2. High limit is based on the data/code rate.
3. This screen is only available when OVERHEAD PCB is installed.
Frame Errors Measured when framed modes of operation are active.
2047 Errors Measured when the RX 2047 PATTERN (under Configuration: Interface menu) is tuned On.