Comtech EF Data SDM-300A - Manual (Page 403)

SDM-300A Satellite Modem Revision 6
Remote Control Operation MN/SLM3650.IOM
A–11
RX 8PSK 2/3
IESS-310
Operation Command:
Response:
Status:
Response: >add/R310_xxx'cr''lf']
>add/R310_xxx'cr''lf']
Where: xxx = ON or OFF.
RX IESS-
315 Turbo
Mode Command:
Response:
Status:
Response: >add/R315_xxx’cr’’lf’’]
>add/R315_xxx’cr’’lf’] Where: xxx = On or Off
Note: Turbo only.
A.7 Interface Configuration Commands
Interface
Transmit
Overhead Type Command:
Response:
Status:
Response: >add/ITOT_xxxxx'cr''lf']
>add/ITOT_xxxxx'cr''lf']
Where: xxxxx = NONE, IDR, IBS, DI, ASYNC,
AUPC, FLEX, or VSAT-IBS.
Interface Receive
Overhead Type Command:
Response:
Status:
Response: >add/IROT_xxxxx'cr''lf']
>add/IROT_xxxxx'cr''lf']
Where: xxxxx = NONE, IDR, IBS, DI, ASYNC,
AUPC, FLEX, or VSAT-IBS.
TX Driver Type Command:
Response:
Status:
Response: >add/TXDR_xxxxx'cr''lf']
>add/TXDR_xxxxx'cr''lf']
Where: xxxxx = G703, V35, RS422, or RS232.
RX Driver Type Command:
Response:
Status:
Response: >add/RXDR_xxxxx'cr''lf']
>add/RXDR_xxxxx'cr''lf']
Where: xxxxx = G703, V35, RS422, or RS232.
Transmit Clock Command:
Response:
Status:
Response: >add/TC_xxx'cr''lf']
>add/TC_xxx'cr''lf']
Where: xxx = INT (internal SCT clock), EXT
(external TX terrestrial clock), REF (external
clock-reference frequency).