Pilz PNOZ m B0 - Manual (Page 64)

Modbus/TCP
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 64
LED status 4 Bit coding
Off 0x0
On 0xF
Flashes 0x3
INFORMATION
The LED status "On" and "Flashes" cannot be determined exactly on many
fieldbus modules.
6.4.8 Process data, left­hand expansion modules
The table below describes the Modbus/TCP data areas containing the state of the inputs on
the expansion modules.
Relevant areas for the data are defined in the Modbus/TCP data areas Discrete Inputs (1x)
and Input Register (3x). Read access is available to these data areas.
Data areas for the first left­hand expansion module
Register
(3x)
Coil/
Discrete Input
(1x) Content
State of the inputs on the first left­hand expansion
module
1348 21575 … 21568 Bit 7 … Bit 0
i7 i6 i5 i4 i3 i2 i1 i0
21583 … 21576 i15 i14 i13 i12 i11 i10 i9 i8
1349 21591 … 21584 i23 i22 i21 i20 i19 i18 i17 i16
21599 … 21592 i31 i30 i29 i28 i27 i26 i25 i24
State of the outputs on the first left­hand expansion
module
1350 21607 … 21600 o7 o6 o5 o4 o3 o2 o1 o0
21615 … 21608 o15 o14 o13 o12 o11 o10 o9 o8
1351 21623 … 21616 o23 o22 o21 o20 o19 o18 o17 o16
21631 … 21624 o31 o30 o29 o28 o27 o26 o25 o24
System LEDs of the first left­hand expansion module
(see below for coding of the LED status)
Assignment
of system and I/O­LEDs [ 155]
Bit 7 … Bit 4 Bit 3 … Bit 0
1352 21639 … 21632 LED 1 LED 0
21647 … 21640 LED 3 LED 2