Pilz PNOZ m B0 - Manual (Page 28)

Communication modules
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 28
5.3.7 Interface configuration
RJ45 socket
8­pin PIN Standard Crossover
8 1
1 TD+ (Transmit+) RD+ (Receive+)
2 TD­ (Transmit­) RD­ (Receive­)
3 RD+ (Receive+) TD+ (Transmit+)
4 n.c. n.c.
5 n.c. n.c.
6 RD­ (Receive­) TD­ (Transmit­)
7 n.c. n.c.
8 n.c. n.c.
5.3.8 RJ45 connection cable
RJ45 connector
8­pin
8
1
10BaseT cable or 100BaseTX cable
max. 100 m
NOTICE
With the plug­in connection please note that the data cable and connector
have a limited mechanical load capacity. Appropriate design measures
should be used to ensure that the plug­in connection is insensitive to in­
creased mechanical stress (e.g. through shock, vibration). Such measures
include fixed routing with strain relief, for example.
5.3.9 Process data exchange
The RJ45 interfaces on the internal autosensing switch enable process data to be ex­
changed with other Ethernet subscribers within a network.
The PNOZ m ES ETH can also be connected to Ethernet via a hub (hub or switch).