7 table 80 - project data, Table 80 project data – Pilz PNOZ m B0 User Manual
Page 118
Appendix
Operating Manual PNOZmulti 2 Communication Interfaces
1002971EN02
118
8.1.7
Table 80 Project data
Table 80 consists of 5 segments, each of which has 13 Bytes. It contains project data,
which has been defined in the PNOZmulti Configurator, among others.
Segment
Byte
Content
0
0, 1
Project check sum
e.g. check sum A1B2 hex:
}
Byte 0: A1,
}
Byte 1: B2
2, 3
Overall project check sum (hex)
4 … 12
Reserved
1
0, 1
Project creation date: Day and month (DDMM), year (YYYY)
e.g. creation date: 28.11.2003:
}
Byte 0: 1C,
}
Byte 1: 0B,
}
Byte 2: 14,
}
Byte 3: 03
2, 3
Date the project was saved (date the program was last changed)
4, 5
Day and month (DDMM), e.g.: 28.11.
}
Byte 4: 1C,
}
Byte 5: 0B
6, 7
Year (YYYY), e.g.: 2003
}
Byte 6: 14,
}
Byte 7: 03
8, 9
Time (HH:MM), e.g. 14 hours, 25 minutes
}
Byte 8: 0E,
}
Byte 9: 19
10, 11
Time zone 1 = Byte 10: 0, Byte 11: 1
12
Reserved
2
Project name defined in the PNOZmulti Configurator under "Enter
project data". The name is stored in UNICODE format (2 Bytes
contain the Hex code of one UNICODE character)
0, 1
1st character of project name
2, 3
2nd character of project name
4, 5
3rd character of project name
6, 7
4th character of project name
8, 9
5th character of project name
10, 11
6th character of project name
12
Free