Pilz PNOZ m B0 - Manual (Page 34)

Communication modules
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 34
5.7.2 Send virtual inputs to the PNOZmulti
Request 0x14 Segment 0x01
The communication partner uses this request to send virtual inputs to the PNOZmulti 2.
The mask (Bytes 24 to 39) is used to determine which of the virtual inputs in a Byte are to
be set.
Telegram
Byte Request Byte Response
0 0x05 0 0x05
1 0x15 1 0x15
2 0x00 2 0x00
3 0x25 3 0x05
4 0x14 4
5 0x00 5 0x00
6 0x01 6 0x01
7 0x00 7 0x00
8 Virtual inputs
Input Byte 0:
i7 to i0
8 0x6B
... ... 9 0x10
23 Virtual inputs
Input Byte 15:
i127 to i120
24 Mask
Mask Byte 0:
i7 to i0
... ...
39 Mask
Mask Byte 15:
i127 to i120
40 BCC
41 0x10
INFORMATION
If a fieldbus module is configured, virtual inputs cannot be activated via the
integrated interface. In this case the request will be rejected by the
PNOZmulti 2 with error message 0x63 (request cannot be executed).