Pilz PNOZ m B0 - Manual (Page 107)

Appendix
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 107
Seg­ment Byte Content
15
System LEDs of the sixth right­hand expansion module (see be­
low for coding of the LED status)
Assignment of system and I/O­
LEDs [ 155]
Bit 7 … Bit 4 Bit 3 … Bit 0
8 LED 1 LED 0
9 LED 3 LED 2
10 LED 5 LED 4
15 11, 12 Reserved
16 0
…
11
Sixth expansion module, state of the inputs and outputs dis­
played on the LEDs, I/O0 … I/O23
16 12 Reserved
17 0
…
3
Sixth expansion module, state of the inputs and outputs dis­
played on the LEDs, I/O24 … I/O31
17 4 … 12 Reserved
LED status 4 Bit coding
Off 0x0
On 0xF
Flashes 0x3
INFORMATION
The LED status "On" and "Flashes" cannot be determined exactly on many
fieldbus modules.
8.1.3 Table 22 ­ Process data, left­hand expansion modules
Table 21 contains 12 segments, each with 13 Bytes of content for each expansion module
to the left of the base unit. It contains
} The state of the inputs and outputs
} The values for the system LEDs for
– supply voltage,
– diagnostics
} The state of the inputs and outputs, which is displayed at the LEDs.