Pilz PNOZ m B0 - Manual (Page 54)

Modbus/TCP
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 54
Register
(3x)
Coil/
Discrete Input
(1x)
Content
1038
…
1041
16671… 16608 Reserved
LED status 4 Bit coding
Off 0x0
On 0xF
Flashes 0x3
INFORMATION
The LED status "On" and "Flashes" cannot be determined exactly on many
fieldbus modules.
6.4.7 Process data, right­hand expansion modules
The table below describes the Modbus/TCP data areas containing the state of the inputs on
the expansion modules.
Relevant areas for the data are defined in the Modbus/TCP data areas Discrete Inputs (1x)
and Input Register (3x). Read access is available to these data areas.
Data areas for the first right­hand expansion module
Register
(3x)
Coil/
Discrete Input
(1x) Content
State of the inputs on the first right­hand expansion
module
1060 16967 … 16960 Bit 7 … Bit 0
i7 i6 i5 i4 i3 i2 i1 i0
16975 … 16968 i15 i14 i13 i12 i11 i10 i9 i8
1061 16983 … 16976 i23 i22 i21 i20 i19 i18 i17 i16
16991 … 16984 i31 i30 i29 i28 i27 i26 i25 i24
State of the outputs on the first right­hand expansion
module
1062 16999 … 16992 o7 o6 o5 o4 o3 o2 o1 o0
17007 … 17000 o15 o14 o13 o12 o11 o10 o9 o8
1063 17015 … 17008 o23 o22 o21 o20 o19 o18 o17 o16
17023 … 17016 o31 o30 o29 o28 o27 o26 o25 o24