Pilz PNOZ m B0 - Manual (Page 10)

Overview ­ Communication options
Operating Manual PNOZmulti 2 Communication Interfaces
1002971­EN­02 10
2.3 Communication via Modbus TCP
For data exchange with Modbus/TCP, the PNOZmulti 2 is the connection server. All the
diagnostic data is defined in one data record, to which the client has direct access.
Communication with Modbus/TCP is described in detail in the chapter entitled Modbus/TCP
[ 45] .
The following device combinations are possible:
Communication Module Base unit
PNOZ m ES ETH PNOZ m B0
INFORMATION
If virtual inputs/outputs are to be downloaded via the communication module
(without using a fieldbus module), the interface "Inputs/outputs that are
downloaded via the integrated interface" must be configured in the hard­
ware configuration in the PNOZmulti Configurator.