Cino M230B - Manual (Page 90)

81
Programming Reference
VERSAJET
FS W
[Name] Turn quadruple-size mode on/off for MBCS characters
[Format] ASCII FS W n
Hex 1C 57 n
Decimal 28 87 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] Turn quadruple-size mode on or off for MBCS characters.
When the LSB of n is 0, quadruple-size mode for MBCS characters is turned off and normal
size is specified. When the LSB of n is 1, quadruple-size mode for MBCS characters is
turned on.
[Notes]
Only the lowest bit of n is valid.
In quadruple-size mode, the printer prints the same size characters as when
double-width and double-height modes are both turn on.
FS! or GS! can also select and cancel quadruple-size mode by selecting double-height
and double-width modes, and the setting of the last received command is effective.