Cino M230B - Manual (Page 70)

61
Programming Reference
VERSAJET
ESC M
[Name] Select character font
[Format] ASCII ESC M n
Hex 1B 4D n
Decimal 27 77 n
[Range] 0, 1, 48, 49
[Default] n = 0
[Description] Selects a character font, using n as follows:
n Function
0, 48 Font A
1, 49 Font B
[Notes]
This mode is effective for alphanumeric, Kana, multilingual and user-defined character.
Configurations of Font A and Font B depend on printer model.
Settings of this command are effective until ESC @ is executed, the printer is reset, or
the power is turned off.