Cino M230B - Manual (Page 116)

107
Programming Reference
VERSAJET
GS ( k QR Code
[Format] ASCII GS ( k pL pH cn fn n
Hex 1D 28 6B 03 00 31 43 n
Decimal 29 40 107 03 00 49 67 n
[Range] (pL + pH X 256) = 3 (pL = 3, pH = 0)
cn = 49, fn = 67
2 ≤ n ≤ 5
[Default] n = 2
[Description] Specifies the size of a module of QR Code symbol.
[Notes]
Settings of this function affect the processing of Functions 181 and 182.
The setting unit differs, depending on the printer models.
Settings of this function are effective until ESC @ is executed, the printer is reset, or the
power is turned off.
n = width of a module = height of a module (Because the QR code modules are square).
The setting unit is 1 dot. The size is set in units of 0.125 mm {1/203 inch}.