Cino M230B - Manual (Page 186)

177
Programming Reference
VERSAJET
RS B
[Name] Restore factory default
[Format]
ASCII RS B
Hex 1E 42
Decimal 30 66
[Range] None
[Default] None
[Description] Restore Factory Default.
[Notes]
This command will reset the setting values of commands stored in the volatile memory.
Therefore, the printer buffer is cleared, and each setting returns to the default value.
The printer goes BUSY while this command is executed. In this case, be sure not to
transmit data from the host.
Excessive use of this function may destroy the non-volatile memory. As a guideline, do
not use this command more than 10 times per day for writing data to the non-volatile
memory.