Cino M230B - Manual (Page 100)

91
Programming Reference
VERSAJET
GS ( K
[Name] Select printing control
[Description] Selects printing control as follows:
Function is specified by the function code fn.
fn Function
49 Function 49 Selects printing density
pL and pH specify parameter number after fn to (pL + pH x 256) bytes.
[Notes]
This command decides the function according to the function code (fn). Performance of
the functions differs, depending on the function.
The settings of this command are effective until ESC @ is executed, the printer is reset,
or the power is turned off.