Cino M230B - Manual (Page 66)

57
Programming Reference
VERSAJET
ESC J
[Name] Print and feed paper
[Format] ASCII ESC J n
Hex 1B 4A n
Decimal 27 74 n
[Range] 0
≤
n
≤
255
[Default] None
[Description] Prints the data in the print buffer and feeds the paper nx (vertical or horizontal motion unit).
[Notes]
The maximum paper feed amount is 320mm. If the specified amount exceeds 320mm,
the paper feed amount is automatically set to 320mm.
When standard mode is selected, the vertical motion unit is used.
When page mode is selected, the vertical or horizontal motion unit is used for the print
direction set by ESC T.
When the starting position is set to the upper left or lower right of the printing area using
ESC T, the vertical motion unit is used.
When the starting position is set to the upper right or lower left of the printing area using
ESC T, the horizontal motion unit is used.
After printing, the printing position moves to the beginning of the line.
When a left margin is set in standard mode, the position of the left margin is the
beginning of the line.