Cino M230B - Manual (Page 242)

233
Programming Reference
VERSAJET
US ` STX
[Name] Close current active communication session
[Format] ASCII US ` STX
Hex 1F 60 02
Decimal 31 96 02
[Description] Current active interface will be free after this command.
[Notes]
This is a real-time command that the printer executes upon receiving it.
Only when the communication session has been over, will all these interfaces be free
again.
A communication session is closed when this command is sent or when the idle timeout
expires. The Idle timeout can be set by command US ` NUL.
You may refer to “Communication Session” on Page 2 of the Introduction Chapter for
more details.