Cino M230B - Manual (Page 85)

76
Programming Reference
VERSAJET
FS &
[Name] Select MBCS character mode
[Format] ASCII FS &
Hex 1C 26
Decimal 28 38
[Description] Selects MBCS character mode.
[Notes]
MBCS codes are processed in order of the first byte and the second byte.
The settings of this command are effective until ESC @ is executed, the printer is reset,
or the power is turned off.
When MBCS mode is selected, the printer processes a character code that corresponds
to the first byte of MBCS code, and then processes a consecutive byte as the second
byte of MBCS code. Therefore, when MBCS code is specified, an ASCII code character
that corresponds to the first byte of MBCS code cannot be printed.
MBCS mode is selected at default.