Cino M230B - Manual (Page 132)

123
Programming Reference
VERSAJET
GS ( k Datamatrix
[Format] ASCII GS ( k pL pH cn fn m d1…dk
Hex 1D 28 6B pL pH 37 50 30 d1…dk
Decimal 29 40 107 pL pH 55 80 48 d1…dk
[Range] 4≤ (pL + pH x 256) ≤4096 (0≤pL≤255, 0≤pH≤255)
cn = 55
fn = 80
m = 48
0 ≤d ≤255
k = (pL + pH x 256) – 3
[Description] Stores the Datamatrix symbol data ( d1...dk ) in the symbol save area.
[Notes]
Data stored in the symbol save area by this function are processed by Function 781. The
data in the symbol save area are reserved after processing Function 781.
k bytes of d1...dk are processed as symbol data.
Specify only the data code word of the symbol with this function. Be sure not to include
the following data in the data d1...dk because they are added automatically by the
printer.
Start pattern and stop pattern
Indicator code word of left and right
The descriptor of symbol length (the first code word in the data area)
The error correction code word calculated by modulus 929
Settings of this function are effective until the following processing is performed:
Function 080 or 180 or 280 or 780 or 880 or 980 is executed
ESC @ is executed
The printer is reset or the power is turned off