Cino M230B - Manual (Page 125)

116
Programming Reference
VERSAJET
GS ( k MaxiCode
[Format] ASCII GS (k pL pH cn fn m
Hex 1D 28 6B 03 00 32 51 m
Decimal 29 40 107 03 00 50 81 m
[Range] (pL + pH x 256) = 3 (pL =3, pH=0)
cn = 50
fn = 81
m = 48
[Default] None
[Description] Encodes and prints the MaxiCode symbol data in the symbol save area.
[Notes]
If there is any error described below in the data of the symbol save area, it cannot be
printed.
There is no data (Function 180 is not processed).
Follow to the [Data format], If any improper data is included, it will
result as a command error.
ESC T is not effective for QR Code, Datamatrix, or MaxiCode.
Barcode Size: Width approximately 28mm(1.01inch); Height approximately
25mm(1inch).
This command is effective only in Page mode.