Cino M230B - Manual (Page 150)

141
Programming Reference
VERSAJET
GS /
[Name] Print downloaded bit image
[Format] ASCII GS / n
Hex 1D 2F n
Decimal 29 47 n
[Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Default] n = 0
[Description] Prints a downloaded bit image using the mode specified by n. n selects a mode from the
table below:
n Mode
0, 48 Normal
1, 49 Double-width
2, 50 Double-height
3, 51 Quadruple
* dpi: dots per inch(25.4mm)
[Notes]
This command is ignored if a downloaded bit image has not been defined.

In standard mode, this command is effective only when there is no data in the print
buffer.

This command has no effect in the print modes (emphasized, double-strike, underline,
character size, or white/black reverse printing), except for upside-down printing mode.
If the downloaded bit image to be printed exceeds the printable area, the excess data is
not printed.