Cino M230B - Manual (Page 55)

46
Programming Reference
VERSAJET [Notes]
Data (d) specifies a bit printed to 1 and not printed to 0.
If the bit image data exceeds the number of dots to be printed on a line, the excess data
is ignored.
The bit-image is not affected by print mode(emphasized, double-strike, underline,
character size, white/black reverse printing, or 90° clockwise-rotated), except for
upside-down printing mode.
After printing a bit image, the printer processes normal data.
This command is used to print a picture or logo.
The relationship between the bit image data and the print result is as follows:
8 dot mode (m = 0, 1)
24 dot mode (m = 32, 33)
MSB
d1 d2 … dk
LSB
MSB
d1 d4 … dk-2
LSB
MSB
d2 d5 … dk-1
LSB
MSB
d3 d6 … dk
LSB