Cino M230B - Manual (Page 52)

43
Programming Reference
VERSAJET
ESC &
[Name] Define user-defined characters
[Format] ASCII ESC & y c1 c2 [x1 d1 d(yx x1)] [xk d1 d(yx xk)]
Hex 1B 26 y c1 c2 [x1 d1 d(yx x1)] [xk d1 d(yx xk)]
Decimal 27 38 y c1 c2 [x1 d1 d(yx x1)] [xk d1 d(yx xk)]
[Range] y = 3
32 ≤ c1 ≤ c2 ≤ 126
0 ≤ x ≤ 12(Font A - 12 x 24)
0 ≤ x ≤ 9(Font B - 9 x 24)
0 ≤ d ≤ 255
k = c2 – c1 + 1
[Default] None
[Description] Defines user-defined characters from character code check c1 to c2.
y specifies the number of bytes in the vertical direction.
x specifies the number of dots in the horizontal direction.
d is the dot data for the user-defined characters.
[Notes]
Character codes from the alphanumeric characters 20H (decimal 32) to 7EH(decimal
126) can be defined.
Data(d) specifies a bit printed to 1 and not printed to 0. The dot pattern is in the
horizontal direction from the left side. Any remaining dots on the right side are blank.
The data to define a user defined character is (yx x) bytes.