Cino M230B - Manual (Page 224)

215
Programming Reference
VERSAJET
US J
[Name] Automatic status feedback
[Format] ASCII US J n
Hex 1F 4A n
Decimal 31 74 n
[Range] 0≤ n ≤1
[Default] n = 1
[Description] Automatic status feedback.
n: Enable/Disable
n Description
0 Disable
1 Enable
[Notes]
Automatic status feedback is the function that transmit the status from the printer automatically.
When n = 0, this function is disabled, the printer does not transmit status automatically.
The printer returns status when receives status request command US r.
When n = 1, this function is enabled, the printer transmit error status automatically when error happened.