Versajet gs i – Cino M230B User Manual
Page 161
152
Programming Reference
VERSAJET
GS I
[Name]
Transmit print IS
[Format]
ASCII
GS I n
Hex
1D 49 n
Decimal
29 73 n
[Range]
n = 65
[Default]
None
[Description]
Transmits printer information, using n as follows:
n
Printer ID
65
Firmware version
[Notes]
With a serial interface printer, be sure to use this function when the host can receive
data.
With a parallel interface printer, data sent with this command is temporarily stored in the
printer send buffer like other transmitted data. When the host goes into reverse mode,
the printer then sends the data sequentially from the beginning of the send buffer.