Versajet – Cino M230B User Manual
Page 53

44
Programming Reference
VERSAJET
When the value of y, c1, c2, or x is out of the range, this command is canceled, and the
following data is processed as normal data.
This command can define user-defined characters for each font independently. To select
a font, use ESC ! or ESC M.
A user-defined character, downloaded graphics, and downloaded bit image cannot be
defined simultaneously.
When this command is executed, the downloaded bit image is cleared.
When GS * is executed, the user-defined character data is cleared.
Once the user-defined characters have been defined, they are available until ESC ?, GS
*, or ESC @ is executed; the user-defined characters are redefined; the power is turned
off; or the printer is reset.
The user-defined characters are not defined at the default, and the resident characters
are printed.
The relationship between the definition data and printing result is as follows.
Example: Downloaded character definition consists of 9 x 24 dots.
d1
d4
d7
d10
d13
d16
d19
d22
d25
MSB
LSB
d2
d5
d8
d11
d14
d17
d20
d23
d26
MSB
LSB
d3
d6
d9
d12
d15
d18
d21
d24
d27
MSB
LSB
Only the MSB can be printed in the third byte for vertical direction of font B. A
user-defined character and downloaded bit image cannot be defined simultaneously.