Cino M230B - Manual (Page 210)

201
Programming Reference
VERSAJET
RS t
[Name] Define flash macro
[Format] ASCII RS t n d1…..dk RS t
Hex 1E 74 n d1…..dk 1E 74
Decimal 30 116 n d1…..dk 30 116
[Range] 1 ≤ n ≤ 8; k ≤ 8186
[Default] None
[Description] Define flash macro.
[Notes]
Macro definition starts when this command is processed during normal operation and
ends when it is processed during macro definition.
While the macro is defined, the printing is also executed.
The maximum data size to be defined as a macro is 8 KB. If the macro definition
exceeds the maximum data size, this command will not be processed, and the LED1
indicator blinks red, the LED2 and LED3 indicators blink green, LED4 indicators blinks
red (means ‘Command Error’).
The macro is executed by RS u.
If the printer processes this command, it will save the macro definition into flash.
The macro can be executed repeatedly after it is defined.
The defined contents of the macro are not cleared by ESC @.
The following commands cannot be contained in a macro. Do not use these commands
while the macro is being defined: FS q, GS ^, and GS v 0.
Excessive use of this function may destroy the non-volatile memory. As a guideline, do
not use this command more than 10 times per day for writing data to the non-volatile
memory.