Cino M230B - Manual (Page 72)

63
Programming Reference
VERSAJET
ESC S
[Name] Select standard mode
[Format] ASCII ESC S
Hex 1B 53
Decimal 27 83
[Range] None
[Default] None
[Description] Switches from page mode to standard mode.
[Notes]
This command is only enabled in page mode. Page mode can be selected by ESC L.
When this command is executed, data in all the printing area is cleared, the printing area
set by ESC W returns to the default value, but the value set by ESC T is maintained.
The following commands switch the settings for standard mode because these
commands can be set independently in standard and page mode: ESC SP, ESC 2, and
ESC 3.
In standard mode, CAN, ESC FF, GS \ are ignored.
The settings of ESC T, and ESC W do not affect printing in standard mode.
The printer selects page with ESC L.
Standard mode is selected as the default.