Cino M230B - Manual (Page 203)

194
Programming Reference
VERSAJET
RS n
[Name] Print *.bmp image
[Format] ASCII RS n n1 n2
Hex 1E 6E n1 n2
Decimal 30 110 n1 n2
[Range] 1 ≤ n1 ≤ 4 ; 0 ≤ n2 ≤ 3 or 48 ≤ n2 ≤ 51
[Default] None
[Description] (1) Print *.bmp image.
(2) n1: Image index no
(3) n2: Image magnification setup
n2 Description
0,48 Normal
1,49 Double-width
2,50 Double-height
3, 51 Quadruple
[Notes]
This command is ignored if a downloaded bit image has not been defined.
This command has no effect in the print modes (emphasized, double-strike, underline,
character size, or white/black reverse printing), except for upside-down printing mode.
If the downloaded bit image to be printed exceeds the printable area, the excess data is not
printed.