Cino M230B - Manual (Page 232)

223
Programming Reference
VERSAJET
Offset Value Bit 0~6 : 0x00~0x7F
Reserved 1
Reserved 1
Paper Sensor Setting 1 0x00: Transmissive, Light from top to bottom
0x01: Reflective, Light from top to bottom
0x04: Transmissive, Light from bottom to top
0x05: Reflective, Light from bottom to top
Reserved 1
Power Off Duration When Connected 1 0x00~0xFF
Power Off Duration When Disconnected 1 0x00~0xFF
Printing Intensity
Printing Intensity
Reserved 1
Bit: 0~3 (0~15)
Bit: 4~7
Automatic Status Feedback (ASB) 1 0x00: Disable
0x01: Enable
Feed Key Control 1 0x00: Feed a line
0x01: Feed one page
Panel Buttons Control 1 Bit 0: (value=0) Disable Power Off
(value=1) Enable Power On
Bit 1: (value=0) Disable Feed Off
(value=1) Enable Feed On
Bit 2~7: Reserved
Reserved 18~32 Reserved
[Description] Get printer configuration.
[Notes]
This is a real-time command that the printer executes upon receiving it.
The printer returns 32 bytes, the first and last bytes are fixed values. Make sure the host
computer can receive data from receiving buffer.