Cino M230B - Manual (Page 120)

111
Programming Reference
VERSAJET
GS ( k QR Code
[Format] ASCII GS ( k p pH cn fn m
Hex 1D 28 6B 03 00 31 51 m
Decimal 29 40 107 03 00 49 81 m
[Range] (pL + pH x 256) = 3 (pL = 3, pH = 0)
cn = 49, fn = 81
m = 48
[Default] None
[Description] Encodes and prints the QR Code symbol data in the symbol save area.
[Notes]
If there is any error described below in the data of the symbol save area, it cannot be
printed.
There is no data (Function 180 is not processed).
If the data of the symbol save area is more than the data allowed by specified model
and data compaction mode. (This case is an abnormal number of data.)
The four data compaction modes are listed below (in order of compaction rate).
Automatically selects best compaction mode by the data of the symbol save area.
– Numerical mode
– Alphanumeric mode
– MBCS mode
– 8-Bit Byte Mode
This command does not affect printing in standard mode.