Cino M230B - Manual (Page 61)

52
Programming Reference
VERSAJET
ESC {
[Name] Turn upside-down printing mode on/ff
[Format] ASCII ESC { n
Hex 1B 7B n
Decimal 27 123 n
[Range] 0 ≤ n ≤ 255
[Default] n = 0
[Description] In standard mode, turns upside-down printing mode on/off
When the LSB of n is 0, upside-down mode is turned off.
When the LSB of n is 1, upside-down mode is turned on.
[Notes]
When standard mode is selected, this command is enabled only when processed at the
beginning of the line.
The upside-down printing mode is effective for all data in standard mode except raster
bit image from GS v 0.
The settings of this command are effective until ESC @ is executed, the printer is reset,
or the power is turned off.
When upside-down printing mode is turned on, the printer prints 180°-rotated characters
from right to left. The line printing order is not reversed; therefore, be careful of the order
of the data transmitted.