Cino M230B - Manual (Page 216)

207
Programming Reference
VERSAJET
US 4
[Name] Auto Tear-off offset setting
[Format] ASCII US 4 n1 n2
Hex 1F 34 n1 n2
Decimal 31 52 n1 n2
[Range] n1 = 0, 0 ≤ n2 ≤ 100 (unit is 0.1mm)
[Default] n1 = 0, n2 = 0
[Description] Auto Tear-off offset setting.
n1 specifies the adjustment direction as follows:
When the LSB of n1 is “0” (Forward), the position is added the offset value.
n1 is a fixed value, “0”. For the mechanical reason, the direction should be forward.
n2 specifies the adjustment amount.