Cino M230B - Manual (Page 86)

77
Programming Reference
VERSAJET
FS -
[Name] Turn underline mode on/off for MBCS characters
[Format] ASCII FS - n
Hex 1C 2D n
Decimal 28 45 n
[Range] 0 ≤ n ≤ 2, 48 ≤ n ≤ 50
[Default] n = 0
[Description] Turns underline mode on or off for MBCS characters, based on the following values of n:
n Function
0, 48 Turns off underline mode for MBCS characters
1, 49 Turns on underline mode for MBCS characters (1-dot thick)
2, 50 Turns on underline mode for MBCS characters (2-dots thick)
[Notes]
The printer can underline all characters, but cannot underline the space set by HT.
The printer cannot underline 90° clock wise rotated characters.
The specified line thickness does not change even when the character size changes.
After the underline mode for MBCS characters is turned off by setting n to 0, underline
printing is no longer performed, but the previously specified underline thickness is not
changed. The default underline thickness is 1 dot.