Cino M230B - Manual (Page 152)

143
Programming Reference
VERSAJET
GS :
[Name] Start/end macro definition
[Format] ASCII GS :
Hex 1D 3A
Decimal 29 58
[Range] None
[Default] None
[Description] Starts or ends macro definition
[Notes]
Macro definition starts when this command is processed during normal operation and
ends when it is processed during macro definition.
While the macro is defined, the printing is also executed.
The maximum data size to be defined as a macro is 2 KB. If the macro definition
exceeds the maximum data size, this command will not be processed, and the LED1
indicator blinks red, the LED2 and LED3 indicators blink green, LED4 indicators blinks
red (means ‘Command Error’).
The macro is executed by GS ^.
If the printer processes this command, it will save the macro definition into RAM. The
macro can be executed repeatedly after it is defined.
The defined contents of the macro are not cleared by ESC @. Defined content of the
macro is effective until the printer is reset, or the power is turned off.
Macro is not defined when the power is turned on.
The following commands cannot be contained in a macro. Do not use these commands
while the macro is being defined: FS q, GS ^, and GS v 0.