Cino M230B - Manual (Page 81)

72
Programming Reference
VERSAJET
ESC d
[Name] Print and feed n lines
[Format] ASCII ESC d n
Hex 1B 64 n
Decimal 27 100 n
[Range] 0
≤
n
≤
255
[Default] None
[Description] Prints the data in the print buffer and feeds n lines.
[Notes]
The amount paper fed per line is based on the value set using the line spacing command
(ESC 2 or ESC 3).
The maximum paper feed amount is 320mm. If the specified amount exceeds 320mm,
the paper feed amount is automatically set to 320mm.
After printing, the printing position moves to the beginning of the line.
When a left margin is set in standard mode, the position of the left margin is the
beginning of the line.
When this command is processed in page mode, only the printing position moves, and
the printer does not perform actual printing.
This command is used to temporarily feed a specific line without changing the line
spacing.