Tools, Remove chassis covers, Tools -5 remove chassis covers -5 – Carrier Access Broadmore 1750 User Manual
Page 87: Warning
Broadmore 1750 - Release 4.6
5-5
Module and Fan Installation
Tools
Tools
The following tools are recommended to install, configure, operate, and maintain the
Broadmore 1750:
#1 flathead screwdriver (for cover removal/installation)
Dual jeweler’s flathead/Phillips screwdriver
ESD wrist strap
Other standard installation tools as desired.
Remove Chassis Covers
1. Loosen captive screws securing the front and rear covers and set the covers
aside.
2. Connect an ESD wrist strap to the front or rear ESD connector and follow
standard ESD procedures while handling unit components.
WARNING!
U
SE
ESD
PRECAUTIONS
: W
EAR
AN
ESD
GROUNDING
STRAP
WHILE
HANDLING
ANY
MODULES
OR
ACCESSING
THE
INSIDE
OF
THE
B
ROADMORE
1750. F
AILURE
TO
FOLLOW
ESD
PROCEDURES
MAY
DAMAGE
SENSITIVE
COMPONENTS
AND
VOID
THE
WARRANTY
.