Carrier Access Broadmore 1750 - Manual (Page 375)

Broadmore 1750 - Release 4.6 C-3
Software Error Messages
System Errors
System Errors
The user cannot address these errors. Contact Carrier Access Customer Support.
MALLOC_FAILED = 0x1000
NULL_POINTER = 0x1001
NOT_A_NIM = 0x1002
NOT_A_SAM = 0x1003
BAD_ATMIFNUM = 0x1004
/* Illegal value for atmIfNum */
ENTRY_ZERO_NOT_RESERVED = 0x1005
/* Connection table entry 0 must be
* reserved for use by error handling
* code. NO_ATM_IF_INDEX must = 0!
*/
LIKELY_MEMORY_LEAK = 0x1006
NONSENSICAL_STATE = 0x1007
/* "Impossible" state of affairs found */
UNREACHABLE_CODE = 0x1008
/* Unreachable code reached! */
OUTBOUND_MSG_TOO_LONG = 0x1009
/* Msg to a DSP is too long */
INBOUND_MSG_TOO_LONG = 0x1010
/* Msg from a DSP is too long */
TRANSMIT_ERROR = 0x1011
/* Error transmitting data to a card */
INVALID_QUEUE_NUMBER = 0x1012
/* Invalid message queue number */