Carrier Access Broadmore 1750 - Manual (Page 262)

10-18 Broadmore 1750 - Release 4.6
Security Management
SNMP Messages
SNMP Messages
You can use the SNMP Properties selection to enable or disable SNMP messages. The
Broadmore supports older SNMP v1 and v2, as well as newer SNMPv3 protocols. You
have the option to disable only SNMPv1 and v2 messages, or all SNMP messages.
Only a SuperUser or SysAdmin can access or change these properties (see “SNMP
Properties” on page
12-3 ).
Select System Management
↵
Select Configure
↵
Select System Services
↵
Select SNMP Configure
↵
Select SNMP Properties
↵