Logging in, Logging in with securid disabled, Logging in -9 – Carrier Access Broadmore 1750 User Manual
Page 275: Logging in with securid disabled -9
Broadmore 1750 - Release 4.6
11-9
Security Management (FIPS Mode)
Logging In
Logging In
NOTE:
If FIPS mode is currently turned off, you must follow the non-
FIPS mode instructions for “Logging In” on page
.
Broadmore units are shipped from the factory with SecurID turned off and FIPS mode
turned off. After logging into the Broadmore, the Crypto Officer can configure the
Broadmore to use SecurID, if desired.
Using both SecurID and FIPS mode with the Broadmore provides a two-stage login.
First, users log in using RSA SecurID. Then they can log into the Broadmore/SSHield
Management Module.
Logging in with SecurID Disabled
The following example uses SecureCRT as the secure client software.
To log into the Broadmore:
1. Open SecureCRT. The Quick Connect window opens.
2. Select ssh2 from the Protocol pull-down menu.