Carrier Access Broadmore 1750 - Manual (Page 320)

12-2 Broadmore 1750 - Release 4.6
SNMP Configuration
SNMP Overview
SNMP Overview
Simple Network Management Protocol (SNMP) is a plain-text service with no access
to any critical security parameters (CSPs). The Broadmore supports SNMP v1, v2, and
v3. Follow the sequence below to configure the SNMP parameters.
NOTE:
SNMPv3 configuration must be performed through CAMMI. Do
not use the CLI to configure SNMPv3 parameters.
Select System Management
↵
Select Configure
↵
Select System Services
↵
Select SNMP Configure
↵
Select the item you want to configure.
With each selection, confirm your changes and press Esc to exit.