Carrier Access Broadmore 1750 - Manual (Page 125)

Broadmore 1750 - Release 4.6 7-11
Configuration
ATM Address
ATM Address
Follow the sequence below and choose Change on the user-defined ATM address
screen.
CAUTION! A N ADDRESS CHANGE WILL CAUSE SERVICE DISRUPTION .
A screen displays to enter the ATM address.
The Media Access Control (MAC) address is the initial default ATM address. Save the
new ATM address after entry to update ATM access information. This newly saved
address will not take effect until the system is rebooted. With signaling turned off, the
ATM address will be displayed as all zeroes.
For dual CPU systems, define the ATM address to keep the same address during a CPU
switchover. Otherwise, an address change will cause service disruption.
ATM Address List (optional)
The following steps are optional for SVC services and are not used for PVCs. The ATM
address list provides a convenient way to store frequently called SVC addresses,
instead of having to enter each address manually when needed. To use this optional
feature, follow the sequence below to display user-defined ATM addresses.
Select System Management
↵
Select Configuration
↵
Select System Services
↵
Select This ATM Address
↵
Select System Management
↵
Select Configuration
↵
Select System Services
↵
Select ATM Address List
↵