Disabling securid, Ip icmp messages, Disabling securid -24 ip icmp messages -24 – Carrier Access Broadmore 1750 User Manual
Page 290
11-24
Broadmore 1750 - Release 4.6
Security Management (FIPS Mode)
Disabling SecurID
Disabling SecurID
NOTE:
SecurID is only available when FIPS mode is turned on (see
). Only the online CPU can be accessed
when SecurID is enabled.
Only a Superuser (Crypto Officer) can change the security modes. The Broadmore is
shipped from the factory with SecurID turned off. The security mode can only be
changed after successfully logging into the Broadmore while in its current security
mode.
1. Using the CAMMI Administration / Security menu, select SecurID and press
the space bar choose Disable.
2. The next time you log into the Broadmore, you will not have to provide any
SecurID credentials.
IP ICMP Messages
You can use the Internet Control Message Protocol selection to enable or disable all
ICMP messages for Internet Protocols such as ping or echo. Disabling ICMP is a
common defense against denial-of-service attacks using ping floods.