Carrier Access Broadmore 1750 - Manual (Page 301)

Broadmore 1750 - Release 4.6 11-35
Security Management (FIPS Mode)
settimeout
DSA Passed
FIPS 186-2 RAND Passed
RSA Passed
SHA1 Passed
IMAGE SIG VERIFY Passed
HMAC-SHA1 Passed
NOTE: If a manually initiated self-test results in a self-test failure, the
management module will reboot.
NOTE: A FIPS algorithm self-test failure will immediately disable all
management connections, as required by FIPS-2. The Broadmore will
continue to carry existing ATM communications traffic across the data
plane but the operating configuration can not be changed until the unit is
repaired.
settimeout
A SuperUser (Crypto Officer) can set the session timeout for the Broadmore craft
port for user inactivity. The command syntax is:
settimeout
Example: settimeout 00:05:00 will set the timeout to 5 minutes.
Entering settimeout by itself will display the current value.
NOTE: The SSH session timeout is fixed at 5 minutes.
sshdShow
A SuperUser (Crypto Officer) can access the SSHD configuration information, at the
Broadmore prompt, by typing sshdShow. An example of the output is provided in the
following graphic.